Printing on the office printers

Check here how to install and use the printer

Enlarge

Kyocera_Ecosys_P6230cdn_ -

Adding the printer(s) (on Mac):

  1. Go to your system preferences (the apple symbol on the top left)
  2. Go to 'Printers & Scanners'
  3. Click on the '+' at the bottom of the printers/scanners list
  4. An new window will appear, you'll see 'A4 Color Office Corner (model:

    ECOSYS P6230cdn)

  5. Click this printer

  6. The needed printer information will now be gathered
  7. After this is done, click on 'Add'

To add the second printer repeat these steps just add 'Cardboard A4 Office Middle' instead of the corner one. 

The printer should now be added to your list of printers

(not in system preferences) If it doesn't show up at first when printing a document, click on 'see more' in your printer dialogue.

Using the printer
As a standard the corner printer holds 80gm Biotop paper. This is fine for daily usage, printing of documents and testing things.

The cardboard printer can be used for printing on 160gm Biotop paper. This is the standard paper that the printer be reloaded with. This paper is used for our menu's and flyers. 

How to print:

1. Open the file on your computer
2. Go to printer > Add printer > Default > Add printer you want to use. 
3. Set your preferences (landscape, portrait, copies, pages etc.)
4. Before you press print, please check what paper is loaded into the printer to avoid printing on the wrong paperweight. 
5. Press print
6. Go to printer to pick your print up.

Please don't leave your paper in or around the printer. Keep it clean. 

How to load paper:

1. Open the tray on the right
2. Put paper in
3. Press go back arrow to confirm paper. 

How to print on both sides of the paper:

There a two ways to print your print on both sides of the paper.
1: 
1. Check the box 'print on both sides of the paper' when you send your printing job. 
2. The other way is to do it manually (ADVICE! It is faster and easier for the printer when you are printing a lot!)
1. First, print the front of your design.
2. Load the printed papers in tray2. With the already printed side facing up and the top of the paper facing right (see image):
3. Print the back of your design. 

Most common errors:

1. PAPER JAM: Please clear the paper as said on the panel and follow instructions.
2. SUPPLIES LOW: Please check what supplies are low and replace them. 
3. LOAD PAPER TRAY # DO NOT DO THIS WITHOUT OFFICE MANAGER PERMISSION: check if there is paper in the described tray (1 or 2). If not load it in the tray you want to use. If it is selecting tray 1, but it is empty and you want to use tray 2, then adjust the leavers to a smaller size. Now it will automatically select tray 2. 

The Kyocera Ecosys P6230cdn was purchased for discountoffice.nl on 11/06/2020 and uses TK-5270 series toners. The toners can be purchased at 123inkt.nl

Enlarge

Manual_Paper_Insert_Kyocera -